CJC

Maintenance is the largest single controllable expense in a manufacturing plant. With as many as 80% of all machine failures related to contamination in the oil, pro-active methods are saving industries considerable costs every year.

This booklet offers an introduction to the problems with insufficient oil cleanliness, the causes and the remedy of the problems. All the information presented is generally known and accepted. It was compiled and published by people within the company C.C.JENSEN A/S. We invite you to take advantage of the experience we have gathered over the past 50 years with oil maintenance within various types of applications. The perfect oil cleaning system will control the level of all types of contamination.

Oil contamination causes approximately

80% of all hydraulic oil system failures!

Wind
Improve Your production factor for wind turbine gearboxes. WTG!

Marine
Avoid breakdown of cranes and other equipment, improve component lifetime and reduce maintenance costs!

Power
Gain less down-time and maintenance costs by avoiding water, particles and varnish in turbine oil systems!

Mining
Avoid down-time and lost production with clean oil in crushers, mills and earth moving equipment!

Various Industries
Avoid breakdowns - 80% of hydraulic systems failures are due to contamination in the oil!

Contamination

Oil contamination causes approximately
80% of all oil system failures!

This contamination takes the form of insoluble materials such as metals, dust particles, sand and rubber. The smallest particles, those below 2 µm, and better known as silt, resin or oxidation deposits are often responsible for defects.

Many of these contaminants influence equipment reliability and lifetime. Nearly 100% of all problems related to contamination of oil and other fluids can be prevented.

C.C.JENSEN A/S has extensive experience in preventing these problems through oil maintenance, with systems developed specifically for the removal of:

Application Studies
Application Studies document the results achieved by using our products. Often supplemented with customer comments, these case stories provide real-life examples of CJC™ Products in use.

PRODUCTS

Our CJC™ Product Range covers solutions for systems containing
from 2 litres to above 200,000 litres - for ensuring Clean Oil:


Fine Filters Removal of Particles & Oil Degradation Products, and Absorption of Water	Filter Separators Removal / Separation of Water, Removal of Particles & Oil Degradation Products	Gear Flushing Units Flushing & Offline Oil Filtration for Wind Turbine Gearboxes - in One System	Varnish Removal Unit Removal of contaminants from oil in Gas & Steam Turbines


Mobile Flushing Unit Oil Filtration & Gear flushing for Mining Applications	Ion Exchange Filter Removing Acidity, Reducing TAN, Improving Resistivity & Surface Tension	Desorbers Removal of large amounts of Water from Emulsified Oils	Monitoring Equipment Oil Contamination Monitoring OCM with Particle Counter


Maersk SEA-Mate Blending on Board Unit blending of main engine cylinder oil	Oil Absorb Systems Removal of Oil from Bilge Water, Polishing Systems	Oil Absorb PreConditioners Conditioning of Bilge Water	Cleaning Tables Cleaning of Machine Parts


Vacuum Filters Removal of Oxygen & Air	Engine Auxiliary Modules For Land Based Power Plants and Marine Vessels	Filter Inserts Dirt & Water Holding Capacity up to 4 L / per insert, 3 µm absolute	Accessories For use in Offline Oil Filtration Systems

CJC™ Oil Systems are ideal for oil/fluid types as:

diesel oils • diesel fuels • engine lube oils • gas oils • gear oils • heat transfer oils • honing oils • hydraulic oils • lube oils • lubricating oils • quenching oils • rolling oils • synthetic gear oils • turbine lube oils • water glycols.